- Chao, L.P., and Ishii, K., (2004), "Design Error Classification
and Knowledge Management," Journal of Knowledge Management Practice,
Vol.
5, May, ISSN 1705-9232. [html]
- Chao, L.P., and Ishii, K., (2004), "Design Process Error-Proofing:
Challenges and Methods in Quantifying Design Elements,"
Proceedings of the Tenth ISSAT International Conference on Reliability
and Quality in Design, August 2004, Las Vegas, NV. [pdf]
- Chao, L.P., and Ishii, K., (2004), "Design Process Errdor-Proofing:
Project Quality Function Deployment," Proceedings of the
ASME Design Engineering Technical Conference, September 2004,
Salt Lake City, UT. DETC2004-57772. [pdf]
- Chao, L.P., Tumer, I., and Ishii, K., (2004), "Design
Process Error-Proofing: Engineering Peer Review Lessons from
NASA," Proceedings of the ASME Design Engineering Technical
Conference, September 2004, Salt Lake City, UT. DETC2004-57764.
[pdf]
- Chao, L.P., and Ishii, K., (2004), "Challenges and Methods
in the Quantification of Design Errors and Solution Elements,"
Proceedings of the ASME International Mechanical Engineering
Congress and Exposition, November 2004, Anaheim, CA. IMECE2004-59190.
[pdf]
- Chao, L.P., and Ishii, K., (2004), "Product Platform
Design and the Gate Model: Lessons from Industry Case Studies,"
Proceedings of the ASME International Mechanical Engineering
Congress and Exposition, November 2004, Anaheim, CA. IMECE2004-60501.
[pdf]
- Cheldelin, B., Ishii, K., (2004), "Mixed-Model Assembly
Quality: An Approach to Prevent Human Errors," Proceedings
of the 2004 ASME International Mechanical Engineering Congress
and Exposition, November 2004, Anaheim, CA. IMECE2004-62279.
[pdf]
- Rhee, S., Ishii, K., (2004), Predicting Cost of Poor Quality
and Reliability for Systems Using Failure Modes and Effects Analysis,,
Proceedings of the 2004 ASME International Mechanical Engineering
Congress and Exposition, November 2004, Anaheim, CA. IMECE2004-59612.
[pdf]
- Takai, S., and Ishii, K., (2004), "Modifying Pugh's
Design Concept Evaluation Methods," Proceedings of the ASME
Design Engineering Technical Conference, September 2004, Salt
Lake City, UT. DETC2004-57512. [pdf]
- Takai, S., and Ishii, K., (2004), "Testing Subjective
Bias in the Analysis of the Customer Needs," Proceedings
of the ASME Design Engineering Technical Conference, September
2004, Salt Lake City, UT. DETC2004-57777. [pdf]
- Yang, T., Beiter, K., and Ishii, K., (2004), Product Platform
Development: An Approach for Products in the Conceptual Stages
of Design, Proceedings of the 2004 ASME International Mechanical
Engineering Congress and Exposition, November 2004, Anaheim,
CA. IMECE2004-62171. [pdf]
|