- Ishii, K., Eubanks, C.F., and Marks, M. (1993). Evaluation
Methodology for Post Manufacturing Issues in Life-cycle Design.
Int. J. of Concurrent Engineering: Research and Applications.
Vol.1, pp.61-68. [pdf]
- Beiter, K., Krizan, S., Ishii, K., and Hornberger, L. (1993).
Hyper Q/Plastic: an expert system for plastic material and process
selection. Advances in Engineering Software (Elsevier) Vol.16,
pp.53-60. [view] [postscript]
- Yu, J. C., Krizan, S., and Ishii, K. (1993), "Computer-aided
Design for Manufacturing Process Selection," Journal of
Intelligent Manufacturing, Vol. 4, pp. 199-208. [pdf]
- Shriver, M., Beiter, K. A., and Ishii, K. (1993), "Characterization
of Recycled Injection Molded Plastics for Material Life-cycle
Analysis," Int. Journal of Environmentally Conscious Design
and Manufacturing," Vol. 2, No. 4, pp. 13-18. [pdf]
- Chong, C., Merhar, C., and Ishii, K. (1993), "Simultaneous
Design for Manufacturing Process Selection of Engineering Plastics,"
Int. J. of Materials and Products Technology. Vol. 9, No. 1/2/3.
pp. 61-78. [pdf]
- Ishii, K. and Eubanks, C.F. (1993). Life-cycle Evaluation
of Mechanical Systems. Proceedings of the NSF Design and Manufacturing
Conference. Society of Manufacturing Engineers. January 1993,
Charlotte, NC. ISBN 0-87263-426-4. pp.575-579.
- Fujikawa, S. and Ishii, K. (1993), "Diagnostics Expert
System for Defects in Forged Parts," Applications of AI
in Engineering VIII (G. Rzevski, J. Pastor, and R. Adey, eds.),
Elsevier, Proc.of the 8th Int. Conf. on AI Applications in Engineering,
July 1993, Toulouse, France, ISBN 1-85312-257-2, Vol. 2, pp.
163-178.
- Ishii, K., Marks, M., Eubanks, C. F., and Shriver, M. (1993),
"Life-cycle Design for Recyclability," Proceedings
of the JSME-ASME Joint Workshop on Design, June 1993, Tokyo,
Japan.
- Yu, J., Ishii, K., and Sundaresan, S. (1993), "Robust
Design Optimization Using Factorial Experiments and Simulation,"
Proceedings of the JSME-ASME Joint Workshop on Design, June 1993,
Tokyo, Japan. [pdf]
- Chong, C., Sogabe, K., and Ishii, K. (1993), "Simultaneous
CAD for Rotational Plastic Parts," ASME Computers in Engineering,
August 1993, San Diego, CA, Vol. 1, ISBN 0-7918-1169-7, pp. 153-160.
[pdf]
- Yu, J., Lotfi, S., Ishii, K., and Trageser, A. (1993), "Process
Selection for the Design of Aluminum Components," ASME Computers
in Engineering, August 1993, San Diego, CA, Vol. 1, ISBN 0-7918-1169-7,
pp. 181-188.
Ishii, K. and Eubanks, C. F. (1993), "Life-cycle Engineering:
Modeling and Tool Development," Proc. of the 9th International
Conference on Engineering Design (ICED), August 1993, The Hague,
Netherlands, Vol. 2, pp. 882-889.
- Marks, M., Eubanks, C. F., and Ishii, K. (1993), "Life-cycle
Clumping of Product Designs for Ownership and Retirement,"
ASME Design Theory and Methodology Conference, September 1993,
Albuquerque, NM, DE-Vol. 53, ISBN 0-7918-1170-0, pp. 83-90. [pdf]
- Sundaresan, S., Ishii, K., and Houser, D. (1993), "A
Robust Optimization Procedure with Variations on Design Variables
and Constraints," ASME Design Automation Conference, September
1993, Albuquerque, NM, DE-Vol. 65-1, ISBN 0-7918-1181-6, pp.
387-394. [pdf]
- Yu, J. and Ishii, K. (1993), "A Robust Optimization
Procedure for Systems with Significant Non-linear Effects,"
ASME Design Automation Conference, September 1993, Albuquerque,
NM, DE-Vol. 65-1, ISBN 0-7918-1181-6, pp. 371-378. [pdf]
|